|Kategorija||Log conversion and resawing machines|
|Katalog||Testera (Horizontalna Stolarska)|
|Opis||DOUBLE AUTOMATIC MILLING PROFILING MOD. SF45 for tilting cut
To work at 45/30/60 degree on floor with 2/3 layers
Production: 1 piece on 9-10 seconds approx
1+1 automatic cutting group KW 2 – rpm 6000
1+1 automatic milling group KW 4,5 – rpm 6000
1+1 automatic milling group KW 4 – rpmi 6000
Piece advancement (feeding) controlled by inverter mt/min 2/24
Automatic piece unloader at the end of the cycle.
Working width mm 1200
Working height mm 800
Working thickness mm 50
Controlled by an electrical panel, the mobile shoulder opens to the width of the wood to be processed. Always electrically, I send the right gripper to the required position when I perform the machining in degrees (30 ° / 45 ° / 60 °), while the left gripper remains in zero position. When I perform the left machining, the right collet remains in zero position while the left collet goes electrically to the required position.
Once the machine has been tested, all engines no longer sell displaced.
The operator loads the piece in front of the pliers by placing it on the stop which is rounded to adapt to any gradation.
Once the piece is resting, the operator starts it, the machine blocks the piece and the two bars accompany the piece (with variable speed by means of an inverter) against the tools.
Cene i uslovi
|Cijena||Pitajte za cijenu|
vrsta informacija koje koristimo za izgradnju ocjena: