Machinining Centre For Routing, Sawing, Boring, Edge Banding IMA BIMA 410 V Polovna Španija

  • Ponuda
    18300662
  • Datum
    2021-03-26
  • Ističe:
    2021-09-22

Proizvod

Kategorija CNC machining center
Katalog Machinining centre for routing, sawing, boring, edge banding
Marka IMA
Model BIMA 410 V

Specifikacije

Stanje dobra Polovna
Godina proizvodnje 2000
Količina 1
Opis CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING:

* Industrial machine with heavy-duty structure
*Working area axes "X","Y", "Z" axes: 4000 mm - 1200 mm - 100 mm
*Travel speed axes "X","Y": 100 m/min - 80 m/min
*Linear speed axis "Z": 25 m/min
* 2 Working areas
* 8 movable work tables to support the panels - approx lenght each 1200 mm
* 23 SCHMALZ suction cups with vacuum system for the locking of the working piece
* 4 loading device through pneumatic bars assembled on the work tables that lift the pieces
* 1 vacuum pump

BORING UNITS:
* 7 independent spindles for vertical boring in "X" direction
* 5 independent spindles for vertical boring in "Y" direction
* 9.000 rpm

ROUTING UNIT:
* 1 electro-spindle in vertical position- 10 HP - automatic change of the tool - "C" VECTOR AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control. 0-18.000 rpm
*Rear tool changer magazine with 12 positions

EDGE BANDING UNITS:
*Automatic device to apply the edge into straight profiles of shaped panels
*Applicable banding material in coils: thin edge and PVC up to 3 mm *Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller
*Lamp zone to pre-heat the side of the panel
*Multiple magazine for edge coils with 2 positions, to automatically change the edge type
*Top and bottom edge trimming head-unit
*Top and bottom edge scraping head-unit

CONTROL OF THE MACHINE:
* IMATRONIC - software IMAWOP
* Command board installed on a separated electrical cabinet to control the machine
* Security norme CE mark
* Protection enclosure of the working units
* Protection grids

OPTIMAL CONDITION. FULLY REVISIONED

Cene i uslovi

Cijena Na zahtjev
Prodaj: Širom svijeta

Prodavači

Kao posjetilac nemate pristup ovoj objavi. Postanite besplatno pretplatnik sada i Imajte slobodan pristup ovoj objavi

 I confirm that I have read and understood Fordaq’s Privacy Statement

By registering you agree to our Zakonske upute