Proizvod |
|
Kategorija | Presses |
---|---|
Katalog | Presa |
Marka | Bürkle |
Specifikacije |
|
Stanje dobra | Polovna |
Godina proizvodnje | 2003 |
Količina | 1 Претвори |
Opis |
Bürkle Schaeftanlage for producing endless plates in the plant are pressed prepared slabs. The clamping is done by a hydraulic. The glue is applied to the surfaces to be glued before feeding of the plant. PROCESS DESCRIPTION: The glue areas responsible glue the slabs are laid over the vacuum portal on the press bed. The alignment of the press made by the alignment stops the press bed. The press operates with a variable clamping pressure as a function of plate width and thickness. After gluing the disk can be formatted with two longitudinal sawing. A third longitudinal saw allows splitting the plate. An integrated cross saw the plates can be tailored to the desired format. Specifications: - Format raw plate: plate thickness of 19 mm - 45 mm Maximum plate: L 5,000 mm x W 3,000 mm Minimum plate size: L 1000 mm x W 1,000 mm - hour approx 10-20 joints - 3 longitudinal saws and 1 cross cut saw - Simatic OP 17 - Translated with google
|
Cene i uslovi |
|
Cijena | Na zahtjev |
Prodaj: | Širom svijeta |
By registering you agree to our Zakonske upute
vrsta informacija koje koristimo za izgradnju ocjena: